Difalco AFX Power Adapter For 3 wire hookup

The kit has 2 flag terminals included. You cut off your AFX plug, crimp on the terminals then attached the terminals on the underside of the panel so they are hidden. The power wires can also be soldered on the underside of the PCB.

To set the direction of travel for 2 wire controllers for  CW or CCW depends on if you connect the + of the power supply to the white or red post screws. For 3 wire controllers it is the same method but if you decide to run negative polarity on the track because you want to run in a CW direction you will of course have to change the controller to negative polarity b flipping the wires on my blue terminal on the controller. I toyed with the idea of adding direction switches to the design but I was not sure how well this would sell so I put that design on the side. I have already been asked about making a panel for the dual power AFX terminals which I will probably make soon.